MAX FLOW RATE

• 300 m³/h (1320 gpm)

MAX HEAD

• 200 m (658 ft)

MAX TEMPERATURE

• 50°C

AVAILABLE MATERIALS

• Ductile Iron
• 316 Stainless Steel
• Alloy 20
• CD4MCu
• Hastelloy B, C AND Many other MOC

Maximum Sealing Flexibility

• Choice of packed box or mechanical seal.
• Any type - inside or outside-single, double, unbalance & balanced mechanical seal.
• Almost any seal will fit without modification of pump.

Reverse Rotation Protection

• Impeller & Pump shaft are two separate components, they are positively locked to one to another and are unaffected by reverse rotation.

Open Impeller

• Ideal for corrosive & abrasive liquid
• Handles solid & stringy fibres with ease
• Back Pump out vanes reduces pressure on shaft seal

Stuffing Box

• STANDARD BORE: Designed for packing, Also able to accommodates mechanical seal.
• BIG BORE: Enlarged Chamber for Increased seal life through improved cooling & lubrication.
• TAPER BORE: Lower seal face temprature, self venting & draining. Solid & Vapours circulated away from seal face.

Stub Shaft

• Trasmits power directly from motor to impeller.
• Elinimates use couplings.

Casing

• Top Centreline discharge
• Back pull out design
• Available in 150#, 300# Flat Face & Raised Face

Accurate Machined Components maintains positive alignment

• Accurate alignment of impeller to casing provides maximum hydrulic efficiency.
• Cocentricity of shaft to stuffing box bore assures low Sealing maintenance.

Shaft Collar

• Locks shaft on motor shaft.
• Easy to install.

Motor Jm Frame

Motor Height Adjustment Block

• Adjusts center height of motor & casing to prevent misalignment.